If you would like the pattern for "Tambour Dragonfly" it is available here for free. Click on each of the images below, then click on the reduced size image that displays to enlarge it again to full size, then use the print button on your browser. Alternatively, you can right click on them and save to your hard drive for later use. Please note: The images have been created to print directly from your browser full scale. After printing, please check the following measurements against the printed pattern so as to ensure correct results can be achieved:
* The width of the top wings from wing tip to wing tip is 6.4 cms
* The height from the top of the body circle to the tip of the tail line is 3.7 cms
Please wait for the image to load before clicking. Once clicked on, click again on the 1/2 scale image that
displays to view full size before printing. The larger image size is to ensure detail is adequate for printing.
It will only take 3 or 4 minutes to display fully on a slow connection speed
NOTE: Change the settings on your printer so as the images print in black, otherwise
it will still print black but needlessly use color ink to do so.
